Full Product Manual

11
System Setup
The System Setup functions allow you to adjust default settings and view
information about the scan tool.
1) Language: Selects the desired language.
2) Unit of Measure: Sets the unit of measure to English or Metric.
3) Beep Set: Turns on/off beep.
4) Key Test: Checks if the keyboard is working properly.
5) LCD Test: Checks if the LCD display is working properly.
6) About: Provides information of the scan tool.
 Tool operates with default settings until changed.
To enter the Setup menu
From the Main Screen: Use LEFT/RIGHT scroll button to select Setup,
and press the OK button. Following the instructions to do adjustments and
settings could make your diagnosis more conveniently and easily.
Figure 2-3
Language Setup
 English is the default language.
1) From System Setup screen, use the UP/DOWN scroll button and
LEFT/RIGHT scroll button to select Language, and press the OK
button.
2) Use the UP/DOWN scroll button to select the desired language and
press the OK button to save your selection and return to previous
screen.