Full Product Manual

40
 If no data from previously tested vehicle is recorded, a message
“No data available!” shows on the screen.
 Review selected data on screen.
Delete Data
By selecting Delete on the review screen (Figure 7-1), you are allowed to
erase the selected data on the scan tool. Review the recordings thoroughly
before erasing. You could also erase all recordings by select Delete All.
NOTE
Don’t use Delete All unless you are definitely sure what you are going to
proceed.
Print Data
The Print Data function allows printing DTC data recorded by the tool by
connecting the tool to a Windows-based PC with the supplied USB cable.
Figure 7-2 Sample Review Data Screen 2
Figure 7-3 Sample Reviewing Data Screen 3