Full Product Manual

28
NOTE
If the On-Board Monitor Test fails, this monitor item will be listed in red.
Figure 3-35 Sample On-board Mon. Test Screen 4
8) Press ESC button to return to the previous menu.
Component Test
The Component Test initiates a leak test for the vehicle's EVAP system. The
scan tool itself does not perform the leak test, but commands the vehicle's
on-board computer to start the test. Different vehicle manufacturers might
use different criteria and methods for stopping the test once it has been
started. Before starting the Component Test, refer to the vehicle service
manual for instructions to stop the test.
1) Use the UP/DOWN scroll button to select Component Test from
Diagnostic Menu and press the OK button.
2) Wait for the scan tool to display the Component Test menu.
Figure 3-36 Sample Component Test Screen 1
3) If the test has been initiated by the vehicle, a confirmation message will
be displayed on the screen.