Full Product Manual

Figure 3-24 Sample Select Memory Screen 2

 If there is no recording in selected location, a message “Not

Supported or Stored No Data” displays on the screen.

3) Use the UP/DOWN button to view recorded PIDs of each frame.

Figure 3-25 Sample Playback Data Screen

4) Use the LEFT/RIGHT button to view PIDs of next or previous frames.

View Freeze Frame Data

Freeze Frame Data allows the technician to view the vehicle’s operating

parameters at the moment a DTC (Diagnostic Trouble Code) is detected.

For example, the parameters may include engine speed (RPM), engine

coolant temperature (ECT), or vehicle speed sensor (VSS) etc. This

information will aid the technician by allowing the parameters to be

duplicated for diagnostic and repair purposes.

1) To view freeze frame data, use the UP/DOWN scroll button to select

View Freeze Frame from Diagnostic Menu and press the OK button.

2) Wait while the scan tool validates the PID MAP.

3) If retrieved information displays on more than one screen, use the

DOWN scroll button, as necessary, until all the data have been shown

up.