Full Product Manual

19
 Drive till a DTC is detected when DTC Trigger is selected. If no
DTCs are detected, press ESC to exit recording.
Figure 3-22 Sample Recording Data Screen
 The number “x/x...” in the upper right corner of the screen indicates
the number of recorded frames out of the maximum frames that
can be recorded.
6) The scan tool keeps recording PID data until the ESC button is pressed,
selected memory location is full, or it completes recording. A message
will display asking if the recording should be played back.
Figure 3-23 Sample Recording Done Screen
 If you wish to playback recorded data, press the OK button; if you
do not wish to playback, press the ESC button, or use
LEFT/RIGHT button to select NO and press the OK button to
return to Record Data menu.
Record Custom Data Set
1) To record customized data, use the UP/DOWN scroll button to select
Custom Data Set from Record Data menu and press the OK button.
2) Observe on-screen instructions. Press the OK button to continue; press
the ESC button, or use LEFT/RIGHT button to select NO and press the
OK button to return to Record Data menu.