Full Product Manual

The scan tool allows access to the results of on-board diagnostic monitoring

tests for specific components/systems. The vehicle manufacturer is

responsible for assigning "Manufacturer Defined Test IDs" and Component

IDs for tests of different systems and components. The advanced feature of

this scan tool enables you to read the definition of an On-Board Diagnostic

Monitor ID.

NOTE

The scan tool will display a test definition if this definition is present in the

vehicle’s computer memory. If no such definition is present, the scan tool will

only display the Test IDs.

In this test, there are typically a minimum value, a maximum value, and a

current value for each monitor. By comparing the current value with the

minimum and maximum value, the scan tool determines if the components

and monitors are OK.

1) Use the UP/DOWN scroll button to select On-Board Mon. Test from

Diagnostic Menu and press the OK button.

2) Wait while the scan tool validates the PID MAP.

3) The scan tool will prompt you to select the vehicle make.

4) After you select the vehicle manufacturer, the scan tool displays the On-

Board Monitors test results for specific monitored systems.

Figure 4-31 Sample On-board Mon. Test Screen 1

5) From On-Board Mon. Test menu, use the UP/DOWN scroll button to

select a test to view and press the OK button. Or, use the LEFT/RIGHT

scroll button to view previous/next screen of test items.

 If the vehicle being tested does not support the mode, an advisory

message will display on the screen.