Full Product Manual

suggested that the vehicle be inspected/repaired before driving the

vehicle further.

If the RED LED lights, there is a definite problem present in the

system(s). In this case, you have the following options:

 Repair the vehicle yourself. If you are going to perform the repairs

yourself, proceed by reading the vehicle service manual and

following all its procedures and recommendations.

 Take the vehicle to a professional to have it serviced. The

problem(s) causing the red LED to light must be repaired before

the vehicle undergoes Emissions Testing.

Audio Tone Interpretation

The audio tone is configured according to the I/M Readiness Status.

Table 4-1

LED Light

Audio Tone

Beep Interval

Green

Two long beeps

5 seconds

Yellow

short, long, short beep

5 seconds

Red

Four short beeps

5 seconds

After you have read the information, press ESC to exit. The other buttons

are disabled to prevent misoperation.

Retrieve I/M Readiness status in typical way

1) Use the UP/DOWN scroll button to select I/M Readiness from

Diagnostic Menu and press OK button.

2) Select the sequence of the I/M Readiness.

3) The details will display on the screen for selection.