Full Product Manual

35
 If DTC Trigger is selected, following screen displays.
Figure 4-20 Sample DTC Trigger Screen
5) Wait for DTC to trigger or press OK to start recording.
 Drive till a DTC is detected when DTC Trigger is selected. If no
DTCs are detected, press ESC to exit recording.
Figure 4-21 Sample Recording Data Screen
 The number “x/x...” in the upper right corner of the screen indicates
the number of recorded frames out of the maximum frames that can
be recorded.
6) The scan tool continues to record PID data until the ESC button is
pressed, selected memory location is full, or it completes recording. A
message will display asking if the recording should be played back.
Figure 4-22 Sample Recording Done Screen