Full Product Manual

 The number “x” to the upper right corner of the screen indicates

sequence of highlighted item; and “#x” are the order that the

parameters are selected and will be displayed.

 Press the LEFT button to deselect all marked items or select all

items. A message displays for your confirmation.

 If you decide to deselect these items, press OK; if you decide not

to, press ESC or use the LEFT/RIGHT scroll button to select NO to

continue PID selections.

4) Press the OK button to view selected PIDs on screen.

Figure 4-14 Sample Custom Data Set Screen 3

5) Use the ESC button to return to previous menu.

Record Data

The Record Data function allows recording vehicle modules’ Parameter

Identification (PID) data to help diagnose intermittent vehicle problems. A

recording includes 5 frames of live data before trigger event and several

frames after trigger event.

There are two trigger modes used to record data:

A. Manual Trigger – press the OK button to start recording.

B. DTC Trigger – automatically records PID data when a fault triggers a

DTC on the vehicle.

NOTE

DO NOT drive and operate the scan tool at the same time!