Full Product Manual

25
 If the “LINKING ERROR” message continues to display, contact
your local distributor or customer service for assistance.
6) You will be prompted to erase previously stored data.
 Review previously stored data before erasing.
Figure 4-1 Sample Erase Previous Data Screen
7) To erase the data, press the OK button; if you do not want to erase the
data, press ESC to exit or use LEFT/RIGHT button to select NO and
press OK to continue.
8) View a summary of system status (MIL status, DTC counts, Monitor
status) on screen. Wait a moment or press any key for Diagnostic
Menu to display.
Figure 4-2 Sample System Status Screen
 If more than one module is detected, you will be prompted to select
a module to test.
 Use the UP/DOWN scroll button to select a module and press the
OK button.