Full Product Manual

11
Figure 2-7 Sample Unit of Measure Screen
3) Press the OK button to save your selection and return to previous menu.
Key Beep Set
This function allows you to turn on/off the built-in speaker for key pressing.
 The default setting is Beep On.
1) From System Setup screen, use the UP/DOWN scroll button to select
Key Beep Set and press the OK button.
2) From Key Beep Set menu, use the UP/DOWN scroll button to select
Beep ON or Beep OFF to turn on/off the beep.
Figure 2-8 Sample Key Beep Set Screen
3) Press the OK button to save your selection and return to previous menu.
Status Beep Set
 The default setting is Beep On.
This function allows you to turn on/off the built-in speaker as an indicator
during diagnostic testing. Different audio tones correspond to different LED
lights. This function is invaluable when performing diagnostics alone, or while
working in bright areas where LED illumination alone is not sufficient.