Full Product Manual

10
Table 2-3
Compression IGN Required Monitors
√
MIS
√
BP
√
FUEL
√
EGS
√
CCM
√
PM
√
HCCAT
√
EGR
√
NCAT
Allowed INC Monitors
From Configure Monitors screen, use the UP/DOWN scroll button to select
Allowed INC Monitors, and press the OK button.
Emissions tests vary depending on the geographic or regional area in which
the vehicle is registered. To this, the scan tool provides a more flexible way
to meet different standards by allowing the user to select 0, 1, 2, or 3 “not
complete” monitors in test.
Reset Factory Default
From Configure Monitors screen, use the UP/DOWN scroll button to select
Reset Factory Default, and press the OK button.
It will restore the default configuration settings in the Configure Monitors
menu, and delete any customized settings. In this case, Spark IGN Required
Monitors and Compression IGN Required Monitors will include all the
available monitors, and the Allowed INC Monitors will be set to 1.
The tool will display a message to ask for your confirmation. Select Yes to
proceed and No to exit without change.
Unit of Measure
 Metric is the default measurement unit.
1) From System Setup screen, use the UP/DOWN scroll button to select
Unit of Measure and press the OK button.
2) From Unit of Measure screen, use the UP/DOWN scroll button to select
the desired unit of measurement.