Full Product Manual

7
UP/DOWN button to view additional information on previous/next
screens.
 If retrieved DTCs contain any manufacturer specific codes, the
AutoVIN function embedded in this tool will automatically display the
definition of the code.
 If definition could not be found, the scan tool displays “Please refer
to vehicle service manual!”
 For DTC Guide information, press the “?” Help button.
4) To view previous or next DTC in the built-in DTC library, use the
LEFT/RIGHT button.
5) To enter another DTC, press the ESC button to return to previous screen.
6) To exit to Main Screen, press the ESC button.
System Setup
The scan tool allows you to make the following adjustments and settings:
1) Language: Selects the desired language.
2) Configure Monitors: Sets the monitors you want to test.
3) Unit of measure: Sets the unit of measure to English or Metric.
4) Key Beep Set: Turns on/off beep.
5) Status Beep Set: Turns on/off the I/M Readiness Status beep.
6) Tool Self-test: Checks if the LCD display, LED lamps and keyboard are
working normally.
7) Update Mode: Accesses the Update Mode.
 Tool operates with default settings until changed.
To enter the Setup menu
From the Main Screen: Use the UP/DOWN scroll button and LEFT/RIGHT
scroll button to select Setup, and press the OK button. Follow the instructions
to make adjustments and settings as described in the above setup options.