Full Product Manual

41
A. Since DTCs Cleared – indicates status of the monitors since the DTCs
are erased.
B. This Drive Cycle – indicates status of monitors since the beginning of
the current drive cycle.
An I/M Readiness Status result of “NO” does not necessarily indicate that
the vehicle being tested will fail the state I/M inspection. For some states,
one or more such monitors may be allowed to be “Not Ready” to pass the
emissions inspection.
OK – indicates that a particular monitor being checked has completed
its diagnostic testing.
INC – indicates that a particular monitor being checked has not
completed its diagnostic testing.
N/A – the monitor is not supported on the vehicle.
There are two ways to retrieve I/M readiness status.
Retrieve I/M Readiness status with One-Click I/M
Readiness Key
Press the One-Click I/M Readiness Key, to retrieve I/M readiness status.
The screen will display as below. The LEDs colors and the audio tones
indicate readiness status.
Figure 4-26
OK – indicates that a particular monitor being checked has completed
its diagnostic testing.
INC – indicates that a particular monitor being checked has not
completed its diagnostic testing.