Full Product Manual

30
Yellow LED
short, long, short beep
5 seconds
Red LED
Four short beeps
5 seconds
After you have read the information, press ENTER/Exit to exit. The other
buttons are disabled to prevent misoperation.
Retrieve I/M Readiness Status in Typical Way
1) Use the SCROLL button to select I/M Readiness from Diagnostic
Menu and press ENTER/Exit button.
2) Wait while the scan tool validates the PID MAP.
3) If the vehicle supports both types of tests, then both types will be
displayed on the screen for selection.
Figure 3-14
4) Use the SCROLL button to view the status of the MIL light (ON or OFF)
and the following monitors.
For spark ignition engines:
 MIS – Misfire Monitor
 FUEL – Fuel System Monitor
 CCM – Comprehensive Component Monitor
 EGR – EGR System Monitor
 O2S – O2 Sensors Monitor
 CAT – Catalyst Monitor
 EVAP – Evaporative System Monitor
 HTR – O2 Sensor Heater Monitor
 AIR – Secondary Air Monitor
 HCAT – Heated Catalyst Monitor