Full Product Manual

23
3) View DTCs and their definitions on screen. Press ENTER/Exit button
to return to previous screen.
Figure 3-5
 The control module number, sequence of the DTCs, total number
of codes detected and type of codes (Generic or Manufacturer
specific, Stored or Pending codes) will be observed on the upper
right hand corner of the display.
4) If more than one DTC is found, use the SCROLL button to review each
code.
 If retrieved DTCs contain any manufacturer specific or enhanced
codes, a “Manufacturer specific codes are found! Press any key to
select vehicle make!” message comes up prompting you to select
vehicle manufacturer to view DTC definitions. Use SCROLL button
to select manufacturer and then press ENTER/Exit button to
confirm.
Figure 3-6
 If the manufacturer of your vehicle is not listed, use the SCROLL
button to select Other and press the ENTER/Exit button.