Full Product Manual

22
indicator light (MIL). If the fault does not occur within a certain number
of warm-up cycles, the code clears from memory.
 Permanent Codes are DTCs that are "confirmed" and are retained in
the non-volatile memory of the vehicle’s computer until the appropriate
monitor for each DTC has determined that the malfunction is no longer
present and is not causing the MIL. Permanent DTCs are stored in
non-volatile memory and can not be erased by any diagnostics service
or by disconnecting power to ECU.
1) Use SCROLL button to select Read Codes from Diagnostic Menu
and press ENTER/Exit button.
Figure 3-3
2) Use the SCROLL button to select Stored Codes or Pending Codes
from the Read Codes menu and press the ENTER/Exit button.
Figure 3-4
 If no codes are found, a message will display “No (pending)
codes are stored in the module!” Wait a moment or press any
key to return to previous screen.
NOTE
Permanent Codes function is available only for vehicles supporting the CAN
protocols.