Full Product Manual

14
This function allows you to turn on/off the built-in speaker as an indicator
during diagnostic testing. Different audio tones correspond to different LED
lights. This function is invaluable when performing diagnostics alone, or
while working in bright areas where LED illumination alone is not sufficient.
1) From System Setup screen, use the SCROLL button to select Status
Beep Set and press the ENTER/Exit button.
2) From Status Beep Set menu, use the SCROLL button to select Beep
ON or Beep OFF to turn on/off the beep.
Figure 2-8
3) Press the ENTER/Exit button to save your selection and return to
previous menu.
Tool Self-test
The Tool Self-test function checks if the display, LED lamps and keyboard
are working properly.
A. Display Test
The Display Test function checks if the LCD display is working normally.
1) From System Setup screen, use the SCROLL button to select Tool
Self-test, and press the ENTER/Exit button.
2) Select Display Test from Tool Self-test menu and press the
ENTER/Exit button to start test.