Full Product Manual

Keyboard

No solvents such as alcohol are allowed to clean the keypad or display. Use

a mild nonabrasive detergent and a soft cotton cloth. Do not soak the

keypad as the keypad is not waterproof.

Power

The scan tool is powered via the vehicle Data Link Connector (DLC). Just

follow the steps below to turn on the scan tool:

1) Locate DLC on vehicle.

 A plastic DLC cover may be found for some vehicles and you need to

remove it before attaching the OBD II cable.

2) Plug the tool’s OBD II cable to the vehicle’s DLC.

System Setup

The scan tool allows you to make the following adjustments and settings:

1) Language: Selects the desired language.

2) Configure Monitors: Sets the monitors you want to test.

3) Unit of Measure: Sets the unit of measure to English or Metric.

4) Key Beep Set: Turns on/off key-press beep.

5) Status Beep Set: Turns on/off the I/M Readiness Status beep.

6) Tool Self-test: Checks if the LCD display, LED lamps and keyboard

are working normally.

7) Update Mode: Accesses the Update Mode.

 Tool operates with default settings until changed.

To Enter the Setup Menu

When the scan tool is powered on, it displays a Main Screen.