Full Product Manual

86
Figure 6-20 Sample Copy by Activation Complete Screen
When the programming is complete, the programmed ID will display in the
column to the right of the wheel designation. In the pictured example, the
new ID is displayed to the right of the FL column.
By using Copy by Activation, the sensor ID that is retrieved from activated
sensor is programmed to the new MX-Sensor.
Because the IDs of the original sensor and the new MX-Sensor are the
same and the ID is already registered to the vehicle ECU, there is no need
to perform the Relearn function when the new programmed sensor has
been attached to the same wheel.
If the IDs retrieved from sensor activation and those registered to the TPMS
ECU are different, please use Copy by OBD to program the IDs saved in
the ECU to the new MX-Sensor.
Copy by OBD
By using this function, the tablet will program the sensor IDs retrieved from
the ECU of the test vehicle to the new MX-Sensors.