Full Product Manual

80
Figure 6-10 Sample Diagnosis Screen 1
If the OBD function is supported by the test vehicle, the sensor ID saved in
the TPMS ECU will be retrieved and displayed on the screen with an OBD
mark before it when the communication is completed.
If the sensor ID retrieved from sensor activation is the same as the ID saved
in the ECU, the trigger mark ( ) and OBD mark ( ) before the IDs will
display green.
If the IDs are different, the marks will become red ( and ). In this case,
the vehicle ECU cannot recognize the sensor installed on the vehicle.
If the OBD function is not supported by the test vehicle, the sensor ID saved
in the TPMS ECU cannot be retrieved and only the sensor ID retrieved from
sensor activation will display on the screen with a signal icon.