Full Product Manual

66
4. Follow the on-screen instructions to tap on the corresponding number
[1] [2] [3] [4] to enter the new value for the cylinder, restore the old
value, and exit after finish the function.
Particle Filter Regeneration
This function is used to perform the particle filter regeneration.
1. Tap Particle filter regeneration from the service functions menu.
2. The tool communicates with the vehicle and reads the fault codes
memory. Follow the on-screen instructions to check the prerequisites
before particle filter regeneration, such as the fuel, the time and driving
style.
3. If prerequisites are met, the tool will ask your confirmation to proceed
as below. Tap Request to begin a regeneration or End to end the
service function and exit.
Figure 5-26 Sample Regeneration Confirmation Screen