Full Product Manual

65
From the Injection Rate menu, tap [1] and the screen displays as below.
NOTE
The data you input should be in given range. If the input data is out of range,
the tool will display a warning message “Permissible adjustment range
exceeded.”
[2] Reset Adjustment to 100%
Once the [2] is pressed, the tool will automatically reset the value to 100%.
[3]/[4] Store Data and Exit
When the injection volume adjustment is completed, select [3] and OK to
store the new value in the control units; or select [4] and OK to retain the old
value.
Injector Rate Adjustment
This function is used to adjust the injector rate for individual cylinders.
1. Tap Injection rate adjustment from the service functions menu.
2. The tool communicates with the vehicle and reads the fault codes
memory. Follow the on-screen instructions to enter the service function.
3. Tap the corresponding number button to enter new value for each
cylinder.
Figure 5-25 Sample Enter Value Screen