Full Product Manual

64
NOTE
The data you input should be in the range given. If the input data is out of
range, the tool will display a warning message “Permissible adjustment
range exceeded.”
[2] Reset Adjustment to 0
Once the [2] is tapped, the tool will automatically reset the value to zero.
[3]/[4] Store Data and Exit
When the fuel delivery rate adjustment is completed, tap [3] to store the
new value in the control units; or select [4] and OK to retain the old value.
Injection Rate
This function is used to adjust the injection volume.
1. Tap Injection Rate from the service functions menu to enter the
service screen.
2. The tool communicates with the vehicle and reads the fault codes
memory. Follow the on-screen instructions to finish this procedure.
3. The tool will display as below. Press the corresponding number button
to perform the desired function.
[1] Enter New Value for Adjustment
Figure 5-24 Sample Injection Rate Screen