Full Product Manual

NOTE

1. AUTEL accepts no responsibility for any accident or injury arising from

servicing the SAS system. When interpreting DTCs retrieved from the

vehicle, always follow the manufacturer’s recommendation for repair.

2. All software screens shown in this manual are examples, actual test

screens may vary for each test vehicle. Pay attention to the menu titles

and on-screen instructions to make correct option selections.

3. Before starting the procedure, make sure the vehicle has ESC button.

Look for the button on dash.

Using Land Rover as an example.

1. Tap the Service application button from the MaxiCOM Job Menu.

2. Tap SAS button and wait for the vehicle manufacturer screen. You can

tap VIN Scan or the vehicle make to acquire vehicle VIN information

and tap Yes to confirm. See Vehicle Identification on page 20 for detail.

3. Tap the desired function in the SAS function list. The list may vary by

test vehicle.

Steering Angle Sensor Calibration

This function allows users to perform steering angle sensor calibration and

clear records. The function options vary by vehicle.

Figure 5-18 Sample SAS Function Menu