Full Product Manual

NOTE

Autel accepts no responsibility for any accident or injury arising from the

maintenance of the Electronic Parking Brake system.

 To perform EPB functions

1. Tap the Service application button from the MaxiCOM Job Menu.

2. Tap EPB button. The vehicle manufacturer selection screen will

display. Tap VIN Scan or the vehicle manufacturer to acquire

vehicle VIN information and tap Yes to confirm. See Vehicle

Identification on page 20 for detail.

3. Tap the desired service in the EPB function list. The list may vary

for different vehicles being tested.

4. Follow the step-by-step on-screen instruction to complete the

service.

5. Press OK button to exit.

EMF Start-up

This service function would start up the parking brake. It must be conducted

after the following repairs:

 Replacing an EMF control unit.

 Replacing the parking brake button.

Figure 5-5 Sample EPB Function List