Full Product Manual

29
1. Navigation Bar
2. Main Section
3. Functional Buttons
Navigation Bar
List Tab – displays the scanned data in list format.
Progress Bar – indicates the test progress.
Main Section
Column 1 – displays the sequence numbers.
Column 2 – displays the scanned systems.
Column 3 – displays the diagnostic indicators describing test results:
These indicators are defined as follows:
 -!-: Indicates that the scanned system may not support the code
reading function, or there is a communication error between the
tablet and the control system.
 -?-: Indicates that the vehicle control system has been detected, but
the tablet cannot accurately locate it.
 Fault(s) | #: Fault(s) indicates there is/are detected fault code(s)
present; “#” indicates the number of the detected faults.
 Pass | No Fault: Indicates the system has passed the scanning
process and no fault has been detected.
Figure 4-9 Sample Auto Scan Operation Screen