Full Product Manual

117
BT Pairing
The MaxiVCI Mini needs to be connected to a vehicle, so that it is powered
during the synchronization procedure. Ensure the tablet has sufficient
battery life or is connected to an external power supply.
 To pair the MaxiVCI Mini with the Tablet
1. Power on the tablet.
2. Insert the 16-pin vehicle data connector of the MaxiVCI Mini to the
vehicle data link connector (DLC).
3. Tap the VCI Manager application on the MaxiCOM Job Menu of
the tablet.
4. Select BT from the connection mode list.
5. Tap the Scan button at the top right corner. Now the device starts
searching for available pairing units.
6. The device name may display as Maxi suffixed with a serial
number. Select the appropriate device for pairing.
7. When paring is successfully done, the connection status displayed
to the right of the device name is shown as Paired.
8. Once paired, the VCI button on the system Navigation bar at the
Connection LED on the MaxiVCI Mini illuminates solid blue. This
signifies that the tablet is connected to the MaxiVCI Mini, and is
ready to perform vehicle diagnosis.
9. Tap the paired device again to unpair it.
10. Tap the Home button on the top left to return to the MaxiCOM Job
Menu.
NOTE
A MaxiVCI Mini can be paired to only one tablet at a time, and once it’s
paired, the device will not be discoverable to other devices.
Update
Please refer to Update via Display Tablet on page 115 for details.