Full Product Manual

114
changes to the software operation or capabilities. Tap
○
i button
to open an information screen to view more details, and tap the dim
area around to close the window.
 Right Column – according to the operation status of each software
item, the button displays differently.
a) Tap Update to update the selected item.
b) Tap Pause to suspend the updating procedure.
c) Tap Continue to go on updating the suspended update.
 To update the diagnostic software and TPMS service software
1. Ensure the tablet is connected to a power source and has a stable
connection with the Internet.
2. Tap the Update application button from the MaxiCOM Job Menu;
or tap the received notification message; or tap the Update icon on
Vehicle Menu in Diagnostics application. The Update application
screen displays.
3. Check all available updates:
 If you decide to update all the items of diagnostic software,
select Diagnostics Tab and then tap the Update All button; if
you want to update all items of TPMS service software, select
TPMS Tab and then tap the Update All button.
 If you only want to update one or some of the item(s), tap the
Update button on the right column of the specific item(s).
4. Tap the Pause button to suspend the updating process. Tap
Continue to resume updating and the process will resume from
the break point.
5. When the updating process is completed, the firmware will be
installed automatically. The previous version will be replaced.
Firmware Update
No separate update button exists to update tablet’s firmware. The firmware
update package will be downloaded together with the software package. An
update firmware message will display.