User Manual

39
[Finish]: After entering the value, use this key to save the value to the tool.
[Show]: Press this key to pop up a soft keyboard to facilitate your input.
[Esc]: Press this key to exit.
The three keys at the bottom of the screen work as below:
[Finish]: When you finished the input, select this key to confirm your input.
[Pre.]: Uses this button to move a space to the left.
[Backspace]: Uses this key to erase the previous digit or character when
typing.
Press Yes to save the data and continue.
NOTE
The data you input should be in the reasonable range. If the input data is out
of range, the tool will display a warning message “Permissible adjustment
range exceeded.”
[2] Reset Adjustment to 0
Once the [2] is pressed, the tool will automatically reset the value to zero.
[3]/[4] Store Data and Exit
When the fuel delivery rate adjustment is completed, select [3] and OK to
store the new value in the control units; or, select [4] and OK to retain the old
value.