User Manual

 The vehicle has the correct spec engine oil.

 The oil for diesel is not contaminated.

IMPORTANT

Before diagnosing a problem vehicle and attempting to perform an

emergency regeneration, it is important to obtain a full diagnostic log and

read out relevant measured value blocks.

NOTE

1. The DPF will not regenerate if the engine management light is on, or

there is a faulty EGR valve.

2. The ECU must be re-adapted when replacing the DPF and when

topping up the fuel additive Eolys.

3. If the vehicle needs to be driven in order to perform a DPF service,

ALWAYS have a second person help you. One person should drive the

vehicle while the other person observes the screen on the Tool. Trying

to drive and observe the Scan Tool at the same time is dangerous, and

could cause a serious traffic accident.

Take BMW as an example. Follow the steps below to do the tests.

Select DPF icon on the Service screen (Figure 5-1), choose BMW from the

vehicle make screen and select the correct vehicle model to enter the

function menu.

Figure 5-17 Sample DPF Functions Screen