User Manual

26
 Ensure that you are fully familiar with the braking system and its
operation before commencing any work.
 The EPB control system may be required to be deactivated before
carrying out any maintenance/diagnostic work on the brake system.
This can be done from the tool menu.
 Only carry out maintenance work when the vehicle is stationary and on
level ground.
 Ensure that the EPB control system is reactivated after the maintenance
work has been completed.
NOTE
Autel accepts no responsibility for any accident or injury arising from the
maintenance of the Electric Parking Brake system.
EPB Functions
Take BMW as an example
1. Select EPB icon on the Service screen (Figure 5-1), choose BMW from
the vehicle make screen and select the correct vehicle model to enter
the Parking Brake menu.
Figure 5-6 Sample EPB Service Screen
2. A screen shows as below, these three functions enable you to calibrate
the parking brake after replacement.