Full Product Manual

80
There are two ways to update your tool.
1. Remove the Micro SD card from the device and connect it with a
Windows-based computer for updating.
2. Connect your tool with a Windows-based computer using the supplied
USB cable and select Update on the Main Menu to enter Update Mode.
The update procedures for the above two update methods are the same.
Follow the update procedure to finish updating.
1. Download the Maxi PC Suite from www.autel.com and install on your
Windows-based PC.
2. Run the Maxi PC Suite. Wait for the Log In window to pop up.
Figure 8-1 Sample Log In Window
3. Enter your Autel ID and password and wait for the Update window to
display. If you forget your password, you may click the [Forget
Password?] to link to our website and find your password back. Or you
may click Sign up to create an Autel ID to continue.
4. Select the product type and serial number, click OK to continue.
5. In the Update window, select the items you want to install. Usually, you
should install all available updates.