Full Product Manual

43
Figure 5-26 Sample Enter New Value for Cylinder
Refer to Starting Basic Inspection Quantity on page 37 for how to enter a
new value with soft keyboard.
B. Restore the Old Value
Select [Restore] and OK to retain the old value.
Select [Back] and OK to return to the previous menu.
Particle Filter Regeneration
This function is used to perform the particle filter regeneration.
1) Select Particle filter regeneration from the service functions menu
(Figure 5-20) and press OK.
2) The tool communicates with the vehicle and reads the fault codes
memory. Follow the on-screen instructions to check the prerequisites
before particle filter regeneration, such as the fuel, the time and driving
style.
3) If every prerequisite is met, the tool will ask your confirmation to proceed
as below. Select Request to begin a regeneration or End to end the
service function and exit.