Full Product Manual

41
Figure 5-24 Sample Enter New Value Screen
Refer to Starting Basic Inspection Quantity on page 37 for how to enter a
new value with soft keyboard.
NOTE
The data you input should be in the reasonable range. If the input data is out
of range, the tool will display a warning message “Permissible adjustment
range exceeded.”
[2] Reset Adjustment to 100%
Once the [2] is pressed, the tool will automatically reset the value to 100%.
[3]/[4] Store Data and Exit
When the injection volume adjustment is completed, select [3] and OK to
store the new value in the control units; or, select [4] and OK to retain the old
value.
Injector Rate Adjustment
This function is used to adjust the injector rate for individual cylinders.
1) Select Injection rate adjustment from the service functions menu
(Figure 5-20) and press OK.
2) The tool communicates with the vehicle and reads the fault codes
memory. Follow the on-screen instructions to finish this procedure.