Full Product Manual

22
Reset Operation
Select Oil Reset icon on the Service screen (Figure 5-1) and wait for the
vehicle manufacturer screen. Choose the correct vehicle make.
There are two ways to perform the reset service.
Manual Reset
Almost all Asian vehicles and most American and European vehicles can be
reset manually by technicians.
NOTE
In this manner, the scan tool will not communicate with the vehicle being
tested.
To finish this procedure, please follow these steps (Take Ford as an
example):
1) Select Ford from the vehicle make screen and press OK.
2) Select the right options for your vehicle step by step according to each
screen that appears until the vehicle information is identified.
3) After entering the vehicle information, the scan tool will display a manual
reset message, press OK to continue.
4) Follow the instructions to reset the service manually.
5) Press ESC to exit.
Auto Reset
Most American and European vehicles can be reset automatically by the
scan tool.
NOTE
In this manner, the scan tool will communicate with the vehicle being tested.
If there is a linking error, please refer to Product Troubleshooting on page 15
for details.
To finish this procedure, please follow these steps (Take Peugeot as an
example):
1) Select Peugeot from the vehicle make screen and press OK.
2) Select the right options for your vehicle step by step according to each
screen that appears until the vehicle information is identified.