Full Product Manual

18
Figure 4-1 Sample Auto Scan Screen
1. Progress Bar – indicates the progress of auto scanning, 100% means
the scan is completed.
2. Main Section
 Column 1 – displays the system numbers
 Column 2 – displays the scanned systems
 Column 3 – displays the diagnostic marks indicating different
conditions of the test result:
 -!-: Indicates that the scanned system may not support the
code reading function, or there is a communication error
between the tester and the control system.
 -?-: Indicates that the vehicle control system has been
detected, but the tester cannot accurately locate it.
 Fault | #: Indicates there is/are detected fault code(s) present;
“#” indicates the number of the detected faults.
 Pass | No Fault: Indicates the system has passed the
scanning process and no fault has been detected.
3. Functional Buttons
 Save – you can save the Auto Scan information as “Vehicle Record”
so that you will not need to follow the vehicle selection process
again on the same vehicle in later tests.