Specifications

Installation and Connection

3. Installation and Connection

3.1 Battery Removal and Installation

Note: If the power indicator light is blinking continuously, this

reminds you to replace batteries in time as instructed.

Fig. 4

1) Turn the display unit handheld upside down to expose the battery

compartment cap and screw. (Fig. 4)

2) Use a screwdriver to remove screw and battery compartment cap.

3) Battery removal and installation.

Fig. 5

√ To remove the batteries, hold handheld display unit to remove

battery compartment and then remove batteries.(Fig. 5)

√ To install the batteries, remove the battery compartment and

insert four(4) new AA batteries into the proper slots in the battery

compartment.