User Manual

5.3 Copy by OBD

This function allows users to write in the saved sensor information to

MX-Sensor after performing Read IDs from Vehicle in Relearn

function.

NOTE: This function is not available under One Wheel mode.

1) Follow the steps in 5.1 Auto Create to select MX-Sensor to enter

the Programming function. The OBD mark will appear on the

right side of the screen (Figure 5.27). After selecting the specific

wheel and pressing the Y button, the “Copy by OBD” option is

available on the function menu (Figure 5.28).

2) Select Copy by OBD, insert the correct MX-Sensor into the

sensor slot, and then press the Y button to start programming the

saved sensor information to the MX-Sensor.

5.4 Copy by Activation

This function allows user to bypass OBD II and automatically write in

the retrieved original sensor data to the MX-Sensor. It is used after the

original sensor is triggered.

All Wheels Mode

1) From the activation screen, select the specific wheel position and

press the TEST button to trigger the original sensor. When the

information is retrieved, a series of beep sound will be heard.

Figure 5.27

Figure 5.28