User Manual

52
character. Use the Y button to finish the input and the screen will
display a message requiring the user for confirmation. Select “Yes”
to save the sensor ID and continue programming or “No” to return
to the previous screen.
Figure 5.25
NOTE: Different sensor from manufacturer may have different ID
character length limit. The scan tool will automatically recognize
the OEM sensor ID character length, and prompt a message when
entered character length is out of limitation.
Figure 5.26
5) Insert the correct MX-Sensor and press the Y button to start
programming or the N button to exit.
NOTE: If a random ID is entered, please perform TPMS Relearn
function after programming is finished. If the original ID is
entered, then there is no need to perform Relearn function.