User Manual

ID, the temperature and the battery voltage after testing the new

programmed MX-Sensor.

Figure 5.21

After all required MX-Sensor is programmed, please switch to All

Wheels Setting and select Write IDs to Vehicle in Relearn

function, refer to 4.2 TPMS Relearn for details.

5.2 Manual Create

This function allows user to manually enter sensor IDs. Users can

enter the random ID or the original sensor ID, if it’s available.

NOTE: Do not enter the same ID for each sensor.

1) Follow the steps in 5.1 Auto Create to select MX-Sensor icon and

then select the required wheel position and press the Y button for

All Wheels mode.

Under One Wheel mode, follow the steps in 5.1 Auto Create to

select MX-Sensor icon and press the Y button.

2) Use the UP/DOWN scroll button to select Manual Create and

press the Y button (Figure 5.22 for All Wheel Mode, Figure 5.23

for One Wheel Mode).