User Manual

48
Figure 5.16
3) Insert the correct MX-Sensor into the sensor slot as displayed
below:
Figure 5.17
NOTE: Please pay attention to the MX-Sensor type displayed in
the screen and insert the correct MX-Sensor. Inserting incorrect
MX-Sensor will cause programming failure.
4) Press the Y button to write in the new created sensor ID to the
MX-Sensor and the screen will show as below (Figure 5.18). If an
error prompts, please keep the MX-Sensor to be programmed
away from other MX-Sensor (Figure 5.19).