User Manual
26
x
Wrong Sensor
Type
A TPMS sensor is activated and decoded,
but does not match the protocol for the
Make, Model or Year that the tool was
set-up for. The tool displays a message
“Sensor triggered but cannot be known”.
In this case, verify the Make, Model or
Year or other features you have selected
as well as the sensor part number that was
fitted.
D
Duplicate ID
(only checked
in All Wheels
mode)
A sensor with a duplicate ID has been
read. The tool displays a message “Sensor
ID Duplicated.”.
In this case, clear data and re-read again.
NOTE: With Ford sensors, the tool should be held 180 degree
away from the stem. Please refer to vehicle user’s manual.
If the TPMS sensor requires a magnet, place the magnet over the
stem and then place the tool alongside the stem, and press TEST
button.
Figure 4.10
If the TPMS sensor requires tire deflation (of the order of 10PSI),
then deflate the tire and place the tool alongside the stem while
pressing the TEST button.