User Manual
23
The tool will do TPMS test in a sequence of FL (Front Left), FR
(Front Right), RR (Rear Right), LR (Rear Left) and SPARE, if the
vehicle has the option for the spare. Or, you can use the UP/DOWN or
LEFT/RIGHT scroll button to move to the desired wheel for testing.
Place the tool alongside the valve stem, point toward the sensor
location, and press the TEST button.
The tool will send LF signal to trigger the sensor. Once the sensor is
successfully activated and decoded, the tool will display as below with
a beep (Figure 4.7).
Figure 4.7
Wheel with a feedback icon, “√”, “x”, “D”, indicates wheel test
has been finished. Refer to Table 1 for detailed description to learn
what testing result each icon stands for.
Figure 4.5
Figure 4.6