User Manual
9
1) Locate the USB port of the device.
2) Connect the device and the computer with the USB cable.
For optimum performance, always keep your tool sufficiently charged.
It is recommended that you charge the tool for over 2 hours before the
first use.
NOTE: Only use the power adaptor or USB cable that is included
in our pack to charge this tool. The use of un-approved power
supplies may damage your tool and void the tool warranty.
3.7 Power Up by DLC
The tool can also be powered via the vehicle Data Link Connector
(DLC). Just follow the steps below to turn on the TPMS tool:
1) Connect the OBD II Cable to the TPMS tool.
2) Find DLC on vehicle.
A plastic DLC cover may be found for some vehicles and you
need to remove it before plugging the OBD II cable.
3) Plug OBD II cable to the vehicle’s DLC.
4) Power up the TPMS tool by pressing the Power button, and wait
for the Main Menu to appear (Figure 3.1).
Figure 3.1
NOTE: OBD II connection does not support battery charging.