User Manual

Digital Inspection Operations Operations
136
 To take pictures using the Digital Inspection application
1. Connect the Imager Head Cable to the USB port on the top side of
the Display Tablet.
2. If not already done, power up the Display Tablet.
3. Tap the Digital Inspection application on the MaxiSys Job Menu.
The Digital Inspection application interface displays, showing a
camera operating screen. The default camera is now the Imager
head.
4. Select the camera icon at the lower right corner to take photos.
5. Focus the image to be captured in the view finder by adjusting and
properly locating the imager head cable.
6. Tap the blue ring on the operating screen. The view finder now
shows the captured picture and auto-saves the taken photo.
7. Tap the thumbnail image on the top right corner of the screen to view
the stored image, slide the screen left and right to view the images
one by one.
8. Tap on the selected image and the edit toolbar instantly displays.
9. Tap the appropriate button to share, delete, or edit the image.
10. Tap the Back or Home button on the Navigation bar at the bottom of
the screen to exit the Digital Inspection application.
 To record a video using the Digital Inspection application
1. Connect the Imager Head Cable to the USB port on the top side of
the Display Tablet.
2. If not already done, power up the Display Tablet.
3. Tap the Digital Inspection application on the MaxiSys Job Menu.
The Digital Inspection application interface displays, showing a
camera operating screen. The default camera is now the Imager
head.
4. Select the video icon at the lower right corner to record a video.
5. Properly locate the imager head cable to focus the inspection scene
for recording.