User Manual

Oscilloscope Operations MaxiScope Firmware Update
130
IMPORTANT: All vehicle communications must be terminated before
resetting the USB connection to avoid damage to the devices and the
vehicle. The Internet connection may be aborted during USB reset.
 If the communication between the MaxiScope and the Display Tablet
still fails after USB reset, restart the Display Tablet and reconnect
the MaxiScope.
16.6 MaxiScope Firmware Update
The operating software of the MaxiScope is continuously being developed,
and the update package can be downloaded free from the MaxiScope product
webpage on Autel’s website: http://www.autel.com
.
 To update the MaxiScope firmware
1. Install the CD provided with the MaxiScope tool kit into the
CD-ROM of the computer. The driver installation wizard will load
momentarily.
2. Click on Next on the welcome page.
3. Click the Browse button, and select a destination folder to install
the program, and click Next to continue. Or directly click Next to
continue without changing the default installation folder.
4. Click Install and the Setup.exe program will be installed onto the
computer.
5. After the installation is completed, connect the MaxiScope to the
computer using the USB cable provided by the tool kit.
6. Locate and double click the MaxiScope Update icon on desktop,
and the Firmware Update window will pop up onscreen.
7. Click on Select File to locate the newly downloaded firmware
update package.
8. Click on the dropdown menu icon by the Set Language option at
the top right of the window to select a desired language.
9. Click on Update to start updating.