User Manual

Update Operations Operations
95
 Right Column – according to the operation status of each software item, the
button displays differently.
a) Tap Update to update the selected item.
b) Tap Pause to suspend the updating procedure.
c) Tap Continue to go on updating the suspended update.
 To update the diagnostic software and TPMS service software
1. Make sure the Display Tablet is connected to a power source with stable
access to the internet.
2. Tap the Update application button from the MaxiSys Job Menu; or tap the
update notification message when received one; or tap the Update icon on
Vehicle Menu in Diagnostics application. The Update application screen
displays.
3. Check all available updates:
 If you decide to update all the items of diagnostic software, select
Diagnostics Tab and then tap the Update All button; if you want to
update all items of TPMS service software, select TPMS Tab and then
tap the Update All button.
 If you only want to update one or some of the item(s), tap the Update
button on the right column of the specific item(s).
4. Tap the Pause button to suspend the updating process. When you tap
Continue to renew the update, the updating process will resume from the
break point.
5. When the updating process is completed, the firmware will be installed
automatically. The previous version will be replaced.