Operation Manual

50
The O2 Monitor Test function is not supported by vehicles which
communicate using a controller area network (CAN). For O2 Monitor Test
results of CAN-equipped vehicles, please refer to “On-Board Mon. Test”.
The data can be saved to the SD card, or be printed.
Figure 3.52: OBD II-O2 Mon. Test Screen
8. On-Board Mon. Test
The On-Board Monitor Test function allows you to view the results of
On-Board Monitor Tests. The tests are useful after servicing or after erasing
a vehicle’s control module memory.
Figure 3.53: OBD II-On Board Mon. Test Screen
9. Component Test
The Component Test function allows you to command the vehicle’s
on-board computer to start a leak test for the vehicle’s EVAP system.