Operation Manual

39
Figure 3.33: Live Data Screen-Graph Merge Display
c. About Analog Display
If the data reading can be displayed as a graph (see Figures 3.32 and 3.33),
you can use the Analog function button to display the data as an analog
gauge. Up to two gauges can be displayed on one screen.
Figure 3.34: Live Data Screen - Analog Display
2. Record Data
The Record function allows you to save data files to the SD card and then
use the Playback function to view the saved files.
NOTE: The length of time for each frame varies per vehicle. Generally,
one frame of data is about 1/4 of a second, or 4 frames per second.
To record to SD Card, please follow these steps:
1. Follow the steps in the Sub-Section 3.3.1 Basic Live Data Procedure to
display the Live Data screen.